Eliminating Scale Build Up On Porcelain Tiles
11 October 2023
5min read time
Guide
Share:
Porcelain tiles are renowned for their durability, aesthetic appeal, and low maintenance requirements. However, over time, scale build-up can mask the beauty of these tiles, resulting in a dull and unattractive appearance.
Fortunately, there is a solution to effectively combat this common problem - Tile & Grout Restore. T&G Restore is a proprietary restoration cleaner designed to tackle black grout lines, embedded stains, mineral scale, efflorescence, cement/grout smear, and general grime. By following the manufacturer's guidelines, users can rejuvenate their tiles and maintain their pristine condition.
Understanding Scale Build Up:
Scale build-up, also known as limescale or mineral deposits, occurs when hard water evaporates, leaving behind mineral residues on surfaces such as porcelain tiles. These deposits are primarily composed of calcium carbonate and magnesium salts, which gradually accumulate and form a hard, crusty layer. The result is a hazy film or white spots that can be challenging to remove with regular cleaning methods.
The Role of Tile & Grout Restore:
Tile & Grout Restore is a specialised chemical product designed specifically to eliminate scale build-up on porcelain tiles. It uses a low-pH formula, this makes it safer to use, with low toxicity and low OH&S risk, while still delivering strong restoration performance. Unlike generic household cleaners, Tile & Grout Restore employs super-wetting agents and is specifically formulated to tackle the specific challenges posed by scale build-up, providing a targeted and efficient solution.
Using Tile & Grout Restore
To restore the finish of porcelain tiles and eliminate scale build-up, it is crucial to follow the product instructions provided by the manufacturer. Here is a general guideline on how to use Tile & Grout Restore effectively:
- Prepare the area: Before applying Tile & Grout Restore, remove any loose debris or dirt from the surface of the tiles. This can be done by sweeping or vacuuming the area.
- Dilute the product: Follow the manufacturer's instructions to determine the proper dilution ratio for Tile & Grout Restore. It is essential to mix the product with water as directed to achieve optimal results. Dilute 1:10 (100ml per 1L of water) to 1:32 parts water (30ml per 1L of water)
- Apply the solution: Using a mop bucket or auto scrubber, apply the diluted Tile & Grout Restore solution to the affected areas of the porcelain tiles. Ensure thorough coverage while avoiding excessive saturation.
- Allow dwell time: Depending on the severity of the scale build-up, allow 10 -20 dwell time. This allows the chemical to penetrate and dissolve the mineral deposits effectively.
- Agitate the surface: Using a non-scratch scrub pad, thoroughly agitate the surface of the tiles to help dislodge the loosened scale build-up. Be cautious not to apply excessive force that may damage the tiles. Agitation can be done by hand or using a rotary scrubbing machine. Agitation is extremely important in scale build-up removal.
- Rinse thoroughly: After agitating the surface, rinse the tiles thoroughly with clean water to remove the dissolved mineral deposits and any remaining residue.
- Dry and assess: Allow the tiles to air dry or use a clean cloth to remove excess moisture. Inspect the surface to ensure that the scale build-up has been effectively eliminated and the tiles have regained their radiant finish. The true result will only be apparent after complete drying.
Safety Precautions:
When using any chemical product, including Tile & Grout Restore, it is vital to prioritise safety. Here are some essential safety precautions to keep in mind:
- Read the product label and instructions carefully before use and strictly follow the recommended guidelines.
- Wear appropriate personal protective equipment (PPE), such as gloves and eye protection, to prevent contact with the product.
- Ensure proper ventilation in the area where T & G Restore is being used to avoid inhaling any fumes.
- Keep the product out of reach of children and pets.
- Store Tile & Grout Restore in a cool, dry place, away from direct sunlight and sources of heat.
Scale build-up on porcelain tiles can be a frustrating issue that compromises the look of these surfaces. Fortunately, with the help of Tile & Grout Restore, an effective chemical solution, restoring the look of porcelain tiles has become a manageable task. By following these instructions and taking appropriate safety precautions, users can eliminate scale build-up and revive their porcelain tiles. With Tile & Grout Restore, your porcelain tiles can regain their former glory, ensuring a visually appealing and long-lasting surface for years to come. To learn more about this product, or to request a demo to see this product in action, call us on 1800 177 399, or email sales@abcopro.com.au
Related Items
Ready to experience the Abco service difference?
Explore how our tailored solutions can help your business. Our team of dedicated experts are ready to assist you throughout every stage of the process.
Get in touch with us
Hours
Mon - Fri
7.00am - 2.30am AEST
© 2025 Abco Products Pty Ltd
Abco acknowledges the Traditional Owners of the land where we work and live. We pay our respects to Elder's past, present and emerging. We celebrate the stories, culture and traditions of Aboriginal and Torres Strait Islanders of all communities who also work and live on this land.
